Post Created date
moving from mega32 to mega16/163
Quote:Also, the 2 MCUs are pin compatible right? Yes and pin compatible with the Mega8535 (even cheaper ??) The M163 is now obsolete. Quote:many of the registers such as SREG...
Monday, 4 April 2005 - 21:38
ATMega8 and AVRStudio4 beginner
Since you have done your homework :-) add below the .include line .equ baud=9600 ;Baud rate (change to whatever you need) .equ fosc=16000000 ;16MHz (change to whatever you need)...
Monday, 4 April 2005 - 21:23
jtag detection by avr studio
I believe that there is a special setup just for the USB. You will need to install that. I can't remember exactly but it is mentioned in the setup.
Monday, 4 April 2005 - 11:04
jtag detection by avr studio
Quote:how am i suppose to make avr studio detect the jtag via usb? I suppose you have it all connected correctly to your target AND have a project set up to be debugged by the...
Monday, 4 April 2005 - 06:06
ISP Connection
Quote:It works... But the datasheet(AVR910) says we have to connect MISO -> MOSI MOSI -> MISO Thats for smaller devices like 8515,2313,mega 8 etc. Larger devices (Mega64, Mega128...
Monday, 4 April 2005 - 05:56
new to avr programming. Where to start?
www.serasidis.gr has some helpful stuff and he has a small forum there too ( not in Greek :-) ) but I think there is also info in Greek.
Sunday, 3 April 2005 - 21:10
Which language for serial and USB I/O in windows?
Quote:Aqua Mala =Bad Water??
Sunday, 3 April 2005 - 21:01
Which language for serial and USB I/O in windows?
I found Delphi 6 pretty easy to use. It generates pretty small code...at least for my application. I have managed to use both RS232 comms and also 9bit mode for my RS485 comms,...
Saturday, 2 April 2005 - 22:12
New North American Atmel Seminars
Quote:Where's the damn seminars in Melbourne, Australia? [code] As a guess they were there about a month ago when we had ours in Sydney and I believe NZ. :-) Get in touch with...
Saturday, 2 April 2005 - 09:41
No more dreams, please!
All those entries in the project category DO HAVE schematics AND code and they are working examples as far as I know.
Saturday, 2 April 2005 - 09:34
ATMega8 and AVRStudio4 beginner
The M8 has a 16 bit stack pointer so you need to initialise SPH also. The USART init needs values for r16 and 17 for the desired baud rate, also if you want to keep it as part of...
Saturday, 2 April 2005 - 09:32
ICE200 Blown output pin ?
I asked Unique which distributes Atmel and also sets up Atmel seminars. We just had one a few weeks ago, were you there? I was fortunate that they had an unused unit in Melbourne...
Friday, 1 April 2005 - 11:03

Pages