Post Created date
Atmega32 to Atmega32 comunication through XBee modules
You have to tell us a lot more. Most likely you have the wrong clock for a good baud rate or incorrect baud rate, wrong connections etc.   You should start by having...
Tuesday, 9 April 2019 - 07:03
ATM90E32AS PGA gain registers question?
I was going to lock this thread but then it's not quite the same as the other post.
Saturday, 6 April 2019 - 20:47
Smallest ISP connector for a "production" board?
a tiny 1mm or 1.27mm pitch 6-pin connector Newer Atmel programmers/debuggers come with 1.27mm pitch 6-pin connector adaptors, at least I have about 3 in my hands.   edit...
Wednesday, 3 April 2019 - 03:28
SAME70 Xplained Ultra Ethernet Issues
I'll lock the double thread, please continue here:
Monday, 1 April 2019 - 19:40
SAME70 Xplained Ultra ethernet PHY daughter board
Added a bit more to the title, hope it's OK. Also moved the thread to the ARM forum.   The error you get when you try to modify is "normal", just wait the time it tells you...
Monday, 1 April 2019 - 19:19
ATMega1284P ELPM instruction issue
  While at church it occured to me to try the access with LPM WHAATT?? You weren't paying attention to the sermon? 
Sunday, 31 March 2019 - 19:12
How do i turn the LED on?
This assembler AS7 project should run on your board, maybe just use the hex file at first. It should also print the status of the switch as well as changing various port pins...
Saturday, 30 March 2019 - 19:26
ATMega328p re-programming on GM328 Transistor Tester
The best people to ask would be the manufacturer to start with, any response from them?
Friday, 29 March 2019 - 20:41
Solved: blinkLED from Elliot Williams book
But you need to wire the power pins on the other side of the chip as well as adding another cap there. See also #2 above.
Friday, 29 March 2019 - 02:49
7 Segment LED Nixie/Numitron Tubes IV-11
I do not have much trust in Banggood. A few months ago a got a "Netflix" box from them, it started working great but then on some programs the video would break up, at times it...
Monday, 25 March 2019 - 00:46
PIC programming
I wrote this PIC16F84 code in assembler. And do you still have hair?? 
Friday, 22 March 2019 - 19:26
arduino uno
It's all sound Latin to me.
Thursday, 21 March 2019 - 00:27