Post Created date
SAMD51 microchip. I do not know where to start
Moved to the Cortex-M forum
Wednesday, 22 May 2019 - 21:24
Atmel ICE no recognised
I think you did it twice.
Monday, 20 May 2019 - 20:38
Atmel Studio 7 debugging application with a non-default start address
ooops I didn't see the UC3 bit senility kicking in fast.   Edit so I found some UC3 info After reset has been released, the AVR32 UC CPU starts fetching instructions from...
Friday, 17 May 2019 - 21:43
Assemby Language Samples??
Here is one for the Atmel assembler, I think it is from ELM_Chan site   Edit oops looks like it needs a companion 16 bit routine or at least a bit of it.
Friday, 17 May 2019 - 06:35
Atmel Studio 7 debugging application with a non-default start address
The breakpoint needs to be at 0x0000 the REAL real start/reset address.
Thursday, 16 May 2019 - 20:36
Programming
how I can send my hex code by spi? And where from do you intend to send this data from? Another chip?   For the Mega8 you have the old AVR910 application note (in assembler...
Wednesday, 15 May 2019 - 20:55
Seeking easiest way to add Bluetooth to an embedded design
HC-06 is not a BLE compatible device. WHAAAT? Are we supposed to read the post and not just the title now?.....
Tuesday, 14 May 2019 - 21:57
Seeking easiest way to add Bluetooth to an embedded design
I like the USART to BT module HC-06.
Tuesday, 14 May 2019 - 05:37
Newhaven Display US2066 driver
I have a ATMEGA4809 Nothing to do with Studio, particularly the ARM related forum. Moving to AVR forum.
Monday, 13 May 2019 - 21:09
Atmel Studio 7 debugging application with a non-default start address
Maybe not the answer you want but I would put a breakpoint where the program usually start and then "Set next statement" wherever you want and continue from there.
Monday, 13 May 2019 - 21:06
Solved: Attiny 85 ADC reads always 1023 irrespective of input
when the ADC3 is measured with a multimeter (when it is not connected to external analog input) the multimeter reads a value near to Vcc Because that's what you have...
Monday, 13 May 2019 - 21:00
Efficient peripheral configuration library
I use assembler so I bypass all the stuff that compiles down to asm anyway... why the aggravation?
Sunday, 12 May 2019 - 06:12

Pages