Post Created date
STK500 - Atmega8 - Invalid Device Signature
error read voltage 1.6v So is your chip plugged into the correct socket in the STK500? Is it plugged backwards?
Sunday, 5 April 2020 - 02:44
Clearing by writing a logical 1
And it's not just an Atmel thing. Motorola used the same thing around 30 years ago.
Sunday, 5 April 2020 - 02:43
Atmel Startup Code Bug
Oh Larry, you are still with us. Send you an email a while ago to check up but got no reply, maybe the email address is no longer any good.
Saturday, 4 April 2020 - 21:37
XMEGA128A4U: Anything Funny About PORTE?
Long shot but do you have ALL VCC, GND and AVCC pins connected?
Saturday, 4 April 2020 - 21:25
Status LED based on other LEDs
Sounds like a weekend project! or a year project, what else is there to do for the rest of the year?
Saturday, 4 April 2020 - 02:27
Ultrasonic sensor is too slow on ATMEGA324
#define F_CPU 1000000The mega 328 can run @ 20,000,000Hz with an external xtal, do you feel that MAY help?
Friday, 3 April 2020 - 20:24
What is DATA means in diagram of I2C Bus
You are correct NY Jim.
Friday, 3 April 2020 - 05:54
What is DATA means in diagram of I2C Bus
Data is the payload for the I2C bus, whether an address, outgoing data or incoming data. ie what ever is being sent or received on the DATA pin SDA.   The SCL or CLOCK is...
Friday, 3 April 2020 - 04:21
Interrupt names for ATmega4809? [SOLVED]
I'll deliver the stake in person with a firm handshake and hug But NY is the epicenter of CV19 ....(not the one from Pavel) you may not make it back to Wisconsin.
Thursday, 2 April 2020 - 02:14
JTAGICE mkII not recognized by Windows anymore
The only way I have ever done firmware upgrades is via Studio itself, I doubt it would install a clone's firmware.   If you used a programmer then you have probably destroyed...
Wednesday, 1 April 2020 - 21:08
JTAGICE mkII not recognized by Windows anymore
The z was me trying to edit the post and figure out if I could just get rid of the rubbish but I gave up, either the corona virus got to the poster's computer or a 1st April joke...
Wednesday, 1 April 2020 - 01:31
JTAGICE mkII not recognized by Windows anymore
No idea what happened with the post above, it seems to have a zillion CRLF at the end and messed up everything, even my notification was bad with no link. Maybe Morten can have a...
Tuesday, 31 March 2020 - 21:46