Post Created date
ATtiny13 and frequency
No really but you have a split post here https://www.avrfreaks.net/forum/...   So I will lock this thread to avoid people responding to more than 1 thread and getting annoyed.
Monday, 29 July 2019 - 07:27
ATtiny13 and frequency
George you are asking help from threads that are many years old and the people are not around anymore. This thread is 12 years old.
Sunday, 28 July 2019 - 21:04
ATmega4808 (UPDI) and Atmel ICE
6 pin connector pin #1 (TDO) -> pin #27 on ATmega (UPDI) Which is correct but you also posted a photo with pin 3 on the 6 pin connector highlighted!   was it...
Saturday, 27 July 2019 - 19:38
ATmega4808 (UPDI) and Atmel ICE
In table 3.5 you posted above and and the other it shows UPDI_data as being the JTAG TDO pin which goes to the MISO pin of the 6 pin connector used for ISP (SPI) which in turn...
Thursday, 25 July 2019 - 23:06
ATmega4808 (UPDI) and Atmel ICE
I think that the UPDI pin is pin1 not 3 on the ICE connector but I may be wrong as I never used that chip.  
Thursday, 25 July 2019 - 21:21
ATmega4808 (UPDI) and Atmel ICE
The actual chip is mounted on a PCB so it should be good, but what we see is people putting stuff on breadboard with only part of the chip powered up, missing resistors and bypass...
Thursday, 25 July 2019 - 20:59
ATmega4808 (UPDI) and Atmel ICE
A picture of your set up?? We usually don't trust people that build stuff on breadboard
Thursday, 25 July 2019 - 20:46
What was your first micro programming experience?
moved on to some 68HC11 project I ave around 20,000 boards spread all over the world with that chip.  The original version fitted everything inside the 2K EEPROM, (E2?),...
Wednesday, 24 July 2019 - 05:29
What was your first micro programming experience?
I started on the company's Motorola Exorciser development system around 1979?? with the 6800 chip, it was a "luxurious" system with paper tape reader for both the assembler and...
Monday, 22 July 2019 - 00:15
TFT LCD Modules
in a message that has been posted in the tech-help-request section of our tiny website Incorrect, it has been correctly posted in the Marketplace forum where I have personally...
Saturday, 20 July 2019 - 22:04
TFT LCD Modules
I have had a look at your range of displays. Do you have a "bar" type graphic display with overall size 160wide MAX, 65 high MAX with a viewing area of at least 50mm high minimum...
Friday, 19 July 2019 - 20:23
How to program ATmega8 using laptop with 15-pin D’SUB connector?
WOW that's an OOOOOOOOLLLLLLLLDDDD chip! And there is no support for such old chips in Studio.
Friday, 19 July 2019 - 19:50

Pages