Post Created date
Atmel Studio Did not find programmer
I think you need to install the Jungo drivers for older device before installing AS7.
Friday, 26 June 2020 - 22:40
Hijacked Terminology?
IIRC erased EEPROMs had 0xFF Unless you were using some National chips, they read as 0 when erased. Must have had an internal inverter.
Friday, 26 June 2020 - 22:27
Atmel Ice not recognized Studio 7.0
More mouse discussions split to here https://www.avrfreaks.net/forum/...
Friday, 26 June 2020 - 04:42
Mouse freezes
  UPDATE: Another new mouse seems to fix the freezing HOWEVER old mouse also works perfectly if the ICE is already plugged in and I unplug and re-plug the mouse back in....
Friday, 26 June 2020 - 04:22
Mouse freezes
what changed when it stopped working? Don't know, everything was working 4 weeks ago when I updated some AVR firmware for a product I make.   Does it work when the ICE is...
Friday, 26 June 2020 - 03:56
Hijacked Terminology?
  Is this EPROM a new thing? No that's the Erasable version. You expose the quartz window to UV to erase. With the newer chips (without the window) you need to drill a...
Friday, 26 June 2020 - 01:34
Atmel Ice not recognized Studio 7.0
What I did was to go into Device manager and plugged in the ICE, got the ding dong and the MICROCHIP driver popped up (do you get this far?), unplug the ice and it disappear....
Friday, 26 June 2020 - 01:25
Reading MAX30100 (heart beat sensor) Data From I2C Bus And display with LED or other devices using bascom codes
We'll give Hamzehazarang one more opportunity before the lock comes on.   Hamzehazarang please start your own thread showing what YOU have done and what you are having...
Friday, 26 June 2020 - 00:31
Atmel Ice not recognized Studio 7.0
Had to use the other Win10 computer and we don't get along too well yet.   When I plug the ICE in I get the Microchip driver popping up.  
Friday, 26 June 2020 - 00:21
Atmel Ice not recognized Studio 7.0
where your drivers are located in Device Manager concerning ICE Not really sure, I try to find it. If so could you advise on how I can verify my current version and re-flash...
Friday, 26 June 2020 - 00:08
Atmel Ice not recognized Studio 7.0
Just checked both of my ICEs and all is well (after upgrading them).   However they freeze the mouse on the Win7 machine!! Never used to happen before, it seems to sort...
Thursday, 25 June 2020 - 03:58
Atmel Ice not recognized Studio 7.0
Jungo Connectivity IS NOT found in Device Manager Jungo has not been used for many years and if it it there it only works for older devices.   I just update my laptop to Win...
Thursday, 25 June 2020 - 03:09

Pages