Type in the full discussion title or a part of it.
Discussion Title Created date
Xmega32E5 DAC offset
I have been doing some tests on the DAC and it seems to have a ~14.5mV offset instead of 0V when data is 0x0000. Tried with a few boards, some with early, sample chips and some...
Friday, 28 August 2015 - 01:25
XME5 ADC offset and calibration...again..
So I'm messing around with this again. The subject seems to be very well "COVERED" in AN1300 need some help in uncovering it.   The calibration bytes need to be read and...
Saturday, 8 August 2015 - 00:57
200+A H-Bridge anyone??
I have been asked to look at the possibility of replacing a contactor with solid state version.   The switch needs to run a DC 12V or 24V motor in either forward or reverse...
Monday, 27 July 2015 - 22:00
Atmel ICE and AVRdude
Any tricks to get them working together? (JTAG MK3 works well)   I have downloaded and installed the latest USB drivers and the ICE is detected when plugged in but the dude (...
Saturday, 18 April 2015 - 07:36
Apologies to sapi
Sorry sapi, I split your post from the topic but the forum software went crazy, created a new topic but the link is incorrect and even though it shows your question and my reply,...
Monday, 1 December 2014 - 08:26
for (nearly) free
Re-post from AVR Chat thread, someone may find them useful. (Authorised by OP) All, I have the following items redundant to my needs; the are unused and in original boxes (but...
Monday, 10 November 2014 - 22:30
Image Craft AVR 8.14 with JDB integrated debugger Released!
They are probably too shy to post here   Visit http://imagecraft.com/jumptoavr.html for more details.  
Thursday, 6 November 2014 - 02:30
3.3v TVS??
I use a SMBJ5.0 to "protect" 5V system from regulator failure but that range starts at 5V, no 3.3V version. Anyone uses anything similar for 3.3V system? (Part number please :-) )
Friday, 22 August 2014 - 08:53
Sick of Xmegas!!!
So finally and about a year later than expected I have a small field test run of boards with Xmega32E5. Got the first 3 of production boards to make sure that the new artwork is...
Tuesday, 8 April 2014 - 10:13
Why the warnings? [solved]
I'm getting these warning on 3 similar lines of code ../Remote_control_relays.c:49: warning: passing argument 1 of 'atoi' discards qualifiers from pointer target type ../...
Tuesday, 5 November 2013 - 20:11
AVR Tools - Now what?
So I installed AVR Tools as I was asked http://avrtools.no/Main.asp?page=2 Now what? :roll: I simply stare at the screen, is this a case of old dogs learning new tricks? :-) The...
Wednesday, 16 October 2013 - 01:25
RS485 info
As we seem to repeat a lot of stuff regarding RS485 I thought it may be a good idea to make up a sticky with some information that prospective users may chew on. As RS485 is an...
Monday, 7 October 2013 - 20:50

Pages