Post Created date
XMEGA32e5 TWI interface - Makes the head hurt - NO MORE START!
I allowed START ....no comment....  when I started to use the E5 I was getting more and more confused with the ASF examples that were supposed to make things easy....
Tuesday, 17 December 2019 - 19:33
Please help!! ADC: Joystick Interface the code isn’t working using ATmega328P microcontroller
You may find the answer here https://www.avrfreaks.net/forum/...
Monday, 16 December 2019 - 04:17
LED flashes from 5vcc-GND on Atmega32a
the voltage regulator is a pre-made board with the capacitors, etc. A CIRCUIT DIAGRAM drawn with a pen or a pencil would have shown us that immediately. The LED's current...
Monday, 16 December 2019 - 00:12
LED flashes from 5vcc-GND on Atmega32a
That's really it, nothing else. ...and that ONE problem even before you start....
Sunday, 15 December 2019 - 22:01
LED flashes from 5vcc-GND on Atmega32a
Post your diagram and code.
Sunday, 15 December 2019 - 21:45
Pull-up not pulling-up
Please don't cross post https://www.avrfreaks.net/forum/...
Sunday, 15 December 2019 - 21:42
atmega4809 HD44780
To start post YOUR code and maybe a diagram of the board you are working with.
Saturday, 14 December 2019 - 20:51
Questions about audio OpAmps and best practice
You may want to get a copy of application note " AVR335: Digital Sound Recorder with AVR® and DataFlash"  
Thursday, 12 December 2019 - 21:24
Atmel-ICE Target Connections Cheat Sheet
With Atmel original tools you have 6 pin header for ISP and also for debugwire for small chips such as the Tiny24.   The 10 pin header is for JTAG debugging for larger chips.
Thursday, 28 November 2019 - 04:56
Whither Tiny OLED Display?
I got an Atmel Dev board with a beautiful little OLED display on it. The Xmega E5 board? I thought I had a diagram with  part numbers but can't find it.
Tuesday, 19 November 2019 - 19:47
Touching SCL pin
Don't touch the pin then, why do you feel the need to touch it?
Friday, 15 November 2019 - 05:40
Comparison 16bits ASM ATmega328
SBI or CBI for registers R0 ~ R31? The I stands for I/O bits. I saw that you have SBR and CBR, The R stands for register bits. However they only work with registers 16-31, see...
Friday, 15 November 2019 - 00:56

Pages