Microcontrollers for Beginners - A hard- and software tutorial
Posted by gavrasm on Tuesday, 18 April 2017 - 08:48
A hard- and software tutorial for AVR programming in assembler. The course is structured in 14 lectures with more than 20 single practical projects, from... |
1 |
Complete code with HW/AVR Assembler |
Tuesday, 18 April 2017 - 08:48 |
avr_select
Posted by gavrasm on Monday, 17 April 2017 - 09:58
A software to select the AVR type by necessary hardware functions.
Devellopped with Lazarus, available as Lazarus source code and executables for 64bit Linux... |
|
Complete code/- |
Monday, 17 April 2017 - 09:58 |
SAMB11
Posted by mvdzwaan on Sunday, 16 April 2017 - 07:43
This project contains some lessons learned for the Atmel/Microchip SAM B11.
The SAMB11 documentation and samples are not complete at this moment and I... |
3 |
Part-specific Lib.functions/Atmel Studio 7 |
Monday, 17 April 2017 - 08:46 |
MME-BOOT - Complete CAN BUS (MCP2515) XMega Bootloader with AES and software to encrypt & update
Posted by cmcraeslo on Monday, 23 January 2017 - 15:55
I've recently migrated one of my devices to CAN BUS which meant that I had to build the firmware upgrade tool for my customers as well. I've looked all... |
1 |
Complete code/Atmel Studio 6 |
Saturday, 24 February 2018 - 17:09 |
AVR Visual Programming
Posted by milgo on Monday, 2 January 2017 - 21:35
What I've created is a environment containing open source software to build applications for AVR microcontroler (atmega8 in this example) using diagrams... |
1 |
Complete code/WinAVR (GNU GCC) |
Monday, 2 January 2017 - 21:41 |
Easy Vacuum dental device controler
Posted by so_sa on Monday, 2 January 2017 - 15:17
Easy Vacuum with Mikrobasic
this file is contain Easy Vacuum with Mikrobasic and new modified function to lib folder and Proteus files.
Our Email... |
|
Complete code/mikroBasic for AVR |
Monday, 2 January 2017 - 15:17 |
Task Scheduler Pattern for the ATtiny104
Posted by Vahled on Saturday, 8 October 2016 - 18:00
Using a standard architectural pattern for a very small
micro-controller.
When I am asked to create a software application for a small 8-bit... |
1 |
Complete code/Atmel Studio 6 |
Saturday, 8 October 2016 - 18:00 |
Moore Finite State machine
Posted by 0x2a on Tuesday, 4 October 2016 - 13:05
Implementation of a table driven Finite State machine using an ATmega328P |
|
Complete code with HW/WinAVR (GNU GCC) |
Tuesday, 4 October 2016 - 13:05 |
uartavr
Posted by 0x2a on Tuesday, 20 September 2016 - 08:39
|
1 |
Part-specific Lib.functions/WinAVR (GNU GCC) |
Wednesday, 21 September 2016 - 06:49 |
Sam3x Arduino Due HC-SR04 with interrupts, reduce ASF layers
Posted by jstampfl on Monday, 12 September 2016 - 10:17
AS7 1006. Began with the "Getting-Started" ASF example for the Arduino Due/Sam3x board.
NOTE: The HC-SR04 is a 5 volt device. ... |
|
Complete code/Atmel Studio 6 |
Monday, 12 September 2016 - 10:18 |
cogging compensation for stepper motor
Posted by rih on Tuesday, 6 September 2016 - 17:59
This project contains software for an Atmel ATTiny84 to control an Allegro A3992 DMOS Dual Full-Bridge Microstepping PWM Motor Driver chip. The ATtiny84... |
1 |
Complete code with HW/WinAVR (GNU GCC) |
Tuesday, 6 September 2016 - 17:59 |
AVR Universal Charger
Posted by martind on Monday, 5 September 2016 - 20:00
Hello everybody,
I just wanted to share with you my most recent project, an AVR Multichemistry charger. There has been a lot of fuzz about charging batteries... |
3 |
Complete code with HW/Atmel Studio 6 |
Monday, 5 September 2016 - 20:00 |
