Type in the full title or a part of it.
Select project type.
Select project compiler.
Specify the project date using the available options.
Specify the minimum number of followers the project must have.
Project Followers Type/Compiler Updated
USB Bulk Vendor example without ASF for the UC3B series
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 2

For those using the standalone toolchain, without the ASF, with a text editor and a makefile for development, this is a simple example of a USB bulk vendor...

Complete code with HW/AVR32 GNU Toolchain Friday, 24 April 2015 - 16:13
Simple, generalized USART setup with i/o (printf() etc.), without ASF, for the UC3B series
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

For those who use the standalone toolchain with a makefile, without ASF, this header will conveniently set up any of the three USARTs in the AT32UC3B series,...

Complete code with HW/AVR32 GNU Toolchain Friday, 3 April 2015 - 21:59
Simplified interrupt handling without ASF for AT32UC3B parts
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I've come up with a quite simple method for using interrupts - without the ASF - for the AT32UC3B series. See my post here for the description: https://www....

Complete code with HW/AVR32 GNU Toolchain Thursday, 5 March 2015 - 20:18
USBASP-tty - USBASP programmer modified with serial support and terminal program
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 4

usbasp+ is a modification to the wonderful usbasp programmer (http://www.fischl.de/usbasp/) with added support  for the on chip UART for communicating...

3 Complete code with HW/WinAVR (GNU GCC) Thursday, 19 February 2015 - 02:28
avr-boot
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

This is a simple command-line based bootloader that provides memory dump and host file download capability using XMODEM protocol. It is tested on only...

Complete code/WinAVR (GNU GCC) Tuesday, 17 February 2015 - 15:43
EEPROM Programmer
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 4

This article is not longer available

4 Complete code/Atmel Studio 6 Wednesday, 1 April 2015 - 11:53
ADC buttons and W/R Pioneer control
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 2

After changing the factory audio system in my car(2008 Nissan Tiida, Nissan Versa in north america) to an aftermarket Pioneer SPH-DA120 I wan'ted to regain the...

1 Complete code/CodeVisionAVR-Standard Sunday, 1 February 2015 - 15:36
Big Digit Clock
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Demo programs for DS1307 RealTime clock breakout board with EEPROM. Assembler code with Hex and LST files.  Uses Nokia 5110 graphics LCD.  

Complete code with HW/AVR Assembler Wednesday, 14 January 2015 - 00:07
Partial schematic of the AVR DRAGON board
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

This is a partial schematic of the board AVR DRAGON   [The attached .RAR file has been safely opened and checked for viruses. Moderator]

-/- Saturday, 10 January 2015 - 13:17
Energy Monitor for Domestic Solar Water Tank
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

This monitor runs a single wire bus with 20 nos DS1820 attached to a domestic water tank to monitor the stored solar energy (KWh) to see whether it is...

1 Complete code/AVR Studio 5 Friday, 2 January 2015 - 15:50
Hand Amptrol
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Take reading from strain guage and output it as a 10k variable resistance as well as some additional logic

Complete code with HW/Atmel Studio 6 Wednesday, 31 December 2014 - 21:02
Interfacing SHT11
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Interface SHT11 with ATMega16. Complete and working code with Circuit Diagram attached.  

Complete code with HW/WinAVR (GNU GCC) Friday, 26 December 2014 - 10:20

Pages