myRFID - Use RDM6300 module to add RFID to MCU application

Ntano's picture
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0



Happy new year to everybody !

This is a small project (in the essence of my "project like design-note")

on adding RFID support with RDM6300 module to an MCU project.

Assembly code for validating the checksum of RFID tag is provided

from the retrieved data-stream and some details for connecting

a 2x16 LCD module, connection to PC-Serial and some other stuff...

ATtiny2313 is used, which is more than enough for this one...