Verifying flash Failed

Log in or register to post comments
Go To Last Post
3 posts / 0 new
Author
Message
SantoshTS
SantoshTS's picture
Level: New Member
Joined: Mon. Nov 20, 2017
Posts: 9 View posts
#1
Posted by SantoshTS: Thu. Feb 1, 2018 - 03:33 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Can anyone help me with this problem.

I am getting verifying failed when i try to program the board.

 

I am using ATSAMV71Q21B .

Atmel Studio 7 (Version: 7.0.1417 - )
© 2015 Atmel Corp.
All rights reserved.

 

 

Timestamp: 2018-02-01 20:55:12.616

Severity: ERROR

ComponentId: 20000

StatusCode: 0

 

Verifying Flash...Failed! address=0x400ef7 expected=0x64 actual=0x65

 

Attachment(s): 

Image icon Verfying Failed.JPG

Santosh

Tags:

Tools, Evaluation and Development Kits (ARM-related)
Last Edited: Thu. Feb 1, 2018 - 03:42 PM
Top
cheungman
cheungman's picture
Level: New Member
Joined: Thu. Dec 9, 2010
Posts: 13 View posts
Posted by cheungman: Fri. Feb 2, 2018 - 02:47 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

short circuit PB12 to VCC, erase flash

Top
DaPa1
DaPa1's picture
Level: New Member
Joined: Tue. Feb 13, 2018
Posts: 8 View posts
Posted by DaPa1: Tue. Feb 13, 2018 - 12:31 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

See https://community.atmel.com/comment/2304156#comment-2304156.

For us the error was on ATSAME70Q21 (SAM E70 XPLND board): if we did a separate manual erase, followed by a write+verify, then it worked. The flashing error appears rarely for us and in different address locations in function of the resulted elf, but when it appears it's staying the same until we change the code and rebuild the binary: till now the only workaround was to do the erase few seconds earlier as found in the linked comment...

 

Daniel

Top