Firmwares with SDKs for ATSAMR21B18 ARM® Cortex®-M0+

Log in or register to post comments
Go To Last Post
2 posts / 0 new
Author
Message
wang70880
wang70880's picture
Level: New Member
Joined: Thu. Jan 28, 2021
Posts: 1 View posts
#1
Posted by wang70880: Thu. Jan 28, 2021 - 07:09 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I have bought a Raspbee II recently with ATSAMR21B18 module on it.

 

https://phoscon.de/en/raspbee2/t...

 

However, the stock firmware is limited and close-source. I want to have a customized firmware for this device. Is there any project and SDKs to develop customized firmware for ATSAMR21B18?

Tags:

Wireless, 802.15.4/ZigBee
Top
Bronze Markawneil
awneil's picture
Level: 10k+ Postman
Joined: Fri. Jul 1, 2005
Posts: 25563 View posts
Location: Basingstoke, Hampshire, UK
Posted by awneil: Thu. Jan 28, 2021 - 06:39 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

What examples does Atmel Microchip Studio show for the part?

 

What about START?

 

You may need to look at examples for the base chip - rather than the module; eg,

 

https://www.microchip.com/wwwproducts/en/ATSAMR21E18A - look on the 'Documents' Tab; also look at 'Demo & Evaluation Boards' on the 'Development Environment' tab; there may be associated software...

 

 

Is the Lightweight Mesh still available?

 

 

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillator: https://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
Top