I want to built the ZLLDemo ColorSceneRemote or Light on BitCloud 3.3.0 using a custom board with an ATSAMR21E19A.
All I did was changing "#define BSP_SUPPORT BOARD_SAMR21_CUSTOM" (which disables lcd/led/joystick/buttons/etc.) in configuration.h.
Building and programming works without problems but the demo does not work at all.
When debugging it seems like appState is always APP_INITING as initMacLayerDone gets never called.
There is also no error thrown, init() just gets called forever.
Do I have to change anything else in oder to get BitCloud to work on a custom board?