I am working on RISC V processor. I want to connect
ATWINC1510 with the processor using SPI. Where I can get the Board support package if available.
Or how can I start programming ATWINC1510 in host mcu.
there are 2 types of Wifi module under ATWI family
->ATWINC1510 -> supported on MCU -> bsp is open source can be ported to other architecture
->ATWILC1000 -> supported on both MPU (Linux and bare metal) and MCU (Running RTOS)
You can use the available BSP in Atmel Studio as reference and port it for your architecture.
a phoenix will rise from the ashes at the right time and at the right place
Thanks, for your kind suggestion. It's very useful.
© 2022 Microchip Technology Inc.