CRITICAL!!! - Atmel Start Loading configuration error

Log in or register to post comments
Go To Last Post
10 posts / 0 new
Author
Message
fcampanini
fcampanini's picture
Level: Rookie
Joined: Tue. Aug 4, 2015
Posts: 42 View posts
#1
Posted by fcampanini: Tue. Sep 15, 2020 - 09:32 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Guys,

i just discover that i can no longer load any atmel start configuration with ATSAMD51 MCU inside the Atmel start online gui, it gives loading error.

I tried different versions i stored of the project but no way.

 

I'm completely totally blocked and i don't want to loose all the work done until now.

 

Please help!!!!

 

Filo

This topic has a solution.

Tags:

Tools, Atmel Software Framework (ASF) and Atmel Start (ASFv4) (ARM-related), solved
Last Edited: Thu. Sep 17, 2020 - 04:41 PM
Top
mcarrier
mcarrier's picture
Level: New Member
Joined: Thu. Jan 2, 2014
Posts: 6 View posts
Posted by mcarrier: Wed. Sep 16, 2020 - 01:55 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Filo, 

You are not alone. I too have seen the same thing starting 9/15/20.

Top
fcampanini
fcampanini's picture
Level: Rookie
Joined: Tue. Aug 4, 2015
Posts: 42 View posts
Posted by fcampanini: Wed. Sep 16, 2020 - 05:38 PM (Reply to #2)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

... i just tried with another setup based upon E54 and it's the same... not loading.

 

c'mon... :-(

 

 

Filo

Last Edited: Wed. Sep 16, 2020 - 05:39 PM
Top
mcarrier
mcarrier's picture
Level: New Member
Joined: Thu. Jan 2, 2014
Posts: 6 View posts
Posted by mcarrier: Wed. Sep 16, 2020 - 07:34 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Are you configuring the clock chain using DPLL0?

Top
fcampanini
fcampanini's picture
Level: Rookie
Joined: Tue. Aug 4, 2015
Posts: 42 View posts
Posted by fcampanini: Wed. Sep 16, 2020 - 08:29 PM (Reply to #4)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

yep

 

Filo

Top
mcarrier
mcarrier's picture
Level: New Member
Joined: Thu. Jan 2, 2014
Posts: 6 View posts
Posted by mcarrier: Wed. Sep 16, 2020 - 08:31 PM (Reply to #5)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Me too. There seems to be a bug in Atmel Start when you have generator 0 set to DPLL0. I have been working with Atmel support and hopefully there is a fix coming soon. In the meantime, I simply have Generator 0 reference the external crystal.

 

Top
fcampanini
fcampanini's picture
Level: Rookie
Joined: Tue. Aug 4, 2015
Posts: 42 View posts
Posted by fcampanini: Wed. Sep 16, 2020 - 08:40 PM (Reply to #6)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Ok thanks a lot for the info.

 

I have a couple of questions.

Question 1: how can i link gen0 to osc (or whatever) without accessing atmel start? any suggestion?

Question 2: how do you access the atmel support?

 

One info more... given that i was blocked here with D51 and E54, I moved to a project with D21. Here atmel config loaded correctly.

I made some change in the config, downloaded in atmel studio, saved and closed. I came back on it 10 minutes ago and BOOM! not loading anymore with  300 lines of error.

 

It might be that hey have some prob with DPLL0 but it seems to me that they have MUCH bigger problem with they QA process pre-release and sanity check after release.  

 

Thanks once again for your support.

 

Filo

Top
scdoubleu
scdoubleu's picture
Level: Hangaround
Joined: Wed. Nov 7, 2007
Posts: 220 View posts
Location: Leicestershire, UK
Posted by scdoubleu: Thu. Sep 17, 2020 - 09:11 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

fcampanini wrote:

Question 1: how can i link gen0 to osc (or whatever) without accessing atmel start? any suggestion?

 

You could take a look at this project rather than relying on Start to configure clocks on D5x/E5x.

 

Steve

Maverick Embedded Technologies Ltd. Home of Maven and wAVR.

Maven: WiFi ARM Cortex-M Debugger/Programmer

wAVR: WiFi AVR ISP/PDI/uPDI Programmer

https://www.maverick-embedded.co...

Top
mcarrier
mcarrier's picture
Level: New Member
Joined: Thu. Jan 2, 2014
Posts: 6 View posts
Posted by mcarrier: Thu. Sep 17, 2020 - 02:45 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Looks like Atmel Start is fixed relative to the clock issue.

 

Top
fcampanini
fcampanini's picture
Level: Rookie
Joined: Tue. Aug 4, 2015
Posts: 42 View posts
This reply has been marked as the solution. 
Posted by fcampanini: Thu. Sep 17, 2020 - 04:41 PM (Reply to #9)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Yes i just checked and they updates the atmel start today

 

 

 

Now both D51 and E54 projects with DPLL0 are working.

Also the D21 project is working now. Into this last project there was no DPLL configured so they eventually fixed other things most likely.

 

Thanks to  scdoubleu  for the link it's indeed interesting.

 

Thanks to all

 

Filippo

 

Top