SAM4L EK

Log in or register to post comments
Go To Last Post
5 posts / 0 new
Author
Message
balaji22
balaji22's picture
Level: New Member
Joined: Thu. Sep 14, 2017
Posts: 2 View posts
#1
Posted by balaji22: Thu. Sep 14, 2017 - 10:18 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hello all,

 

I am currently working on ATSAM4LC4C microcontroller.   This is first embedded project.  I have to connect a bluetooth module with my MCU and i have to send and receive messages using USART.  Can anyone send me some sample or example programs of connecting bluetooth module using USART in the ATMEL STUDIO 7.

 

Thanks in advance.

balaji palani

Tags:

Atmel SMART ARM-based MCUs and MPUs, Atmel Cortex-A MPUs
Last Edited: Thu. Sep 14, 2017 - 11:11 AM
Top
Kartman
Kartman's picture
Level: 10k+ Postman
Joined: Thu. Dec 30, 2004
Posts: 24979 View posts
Location: Melbourne,Australia
Posted by Kartman: Thu. Sep 14, 2017 - 10:41 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

So why post this in the tutorials section for AVRs? You want the sam section.

Top
balaji22
balaji22's picture
Level: New Member
Joined: Thu. Sep 14, 2017
Posts: 2 View posts
Posted by balaji22: Thu. Sep 14, 2017 - 02:58 PM (Reply to #2)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Sorry i was wrongly posted.

balaji palani

Top
rasik91
rasik91's picture
Level: New Member
Joined: Tue. Jun 11, 2019
Posts: 1 View posts
Posted by rasik91: Thu. Jun 20, 2019 - 11:15 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hello All

I am started use SAM4L -EK can any one provide the step by step process for connecting the board and loading a sample program with code. 

Top
Lajon
Lajon's picture
Level: Raving Lunatic
Joined: Fri. Mar 12, 2004
Posts: 2932 View posts
Location: Linköping, Sweden
Posted by Lajon: Fri. Jun 21, 2019 - 06:03 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I don't have one but I imagine (with Atmel Studio + ASF extension installed) you can File/New/Example Project... select Kit on the left and then select SAM4L-EK. Then select an example to try. Hopefully (with the board connected) you can then select a Tool (debugger) in the Project dialog and run the project with Debug/Start without debugging or Start debugging and break.

/Lars

 

Top