Problem with Xplained Ultra SAM V71: EDBG CMSIS-DAP driver not found on Win7 Pro.

Log in or register to post comments
Go To Last Post
17 posts / 0 new
Author
Message
c.dicaprio
c.dicaprio's picture
Level: New Member
Joined: Wed. Jun 10, 2015
Posts: 8 View posts
#1
Posted by c.dicaprio: Wed. Jun 10, 2015 - 12:04 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hello to all,

I installed the "driver-atmel-bundle-7.0.712" software, but my Win 7 Pro SP1 did not found the driver, for the "EDBG CMSIS-DAP" debug interface.
Where can I found the right driver for the EDBG?

 

TIA

Clemente

Tags:

Tools, In-System Debuggers and Programmers (ARM-related)
Last Edited: Sun. Mar 19, 2017 - 09:21 PM
Top
c.dicaprio
c.dicaprio's picture
Level: New Member
Joined: Wed. Jun 10, 2015
Posts: 8 View posts
Posted by c.dicaprio: Wed. Jun 10, 2015 - 01:20 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Just an update.

I installed the AVR Studio 6.2 sp2, but nothing changed.

I try to uninstall the driver and install it again. Same error again.

Any ideas? :-(

 

TIA

Clemente

Top
alexru
alexru's picture
Level: Raving Lunatic
Joined: Wed. Apr 15, 2009
Posts: 8059 View posts
Location: San Jose, CA
Posted by alexru: Wed. Jun 10, 2015 - 05:08 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 1

Usually drivers supplied with Atmel Studio just work. I would try to uninstall both drivers and the studio, then only install studio and your system should pickup the driver.

NOTE: I no longer actively read this forum. Please ask your question on www.eevblog.com/forum if you want my answer.

Top
c.dicaprio
c.dicaprio's picture
Level: New Member
Joined: Wed. Jun 10, 2015
Posts: 8 View posts
Posted by c.dicaprio: Wed. Jun 10, 2015 - 05:31 PM (Reply to #3)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

alexru wrote:

Usually drivers supplied with Atmel Studio just work. I would try to uninstall both drivers and the studio, then only install studio and your system should pickup the driver.

Thank you Alexru, I will try soon.

But what means: I have to have  AVR Studio installed if I want to develop with Keil, for example?

 

Thanks again

Clemente

Top
alexru
alexru's picture
Level: Raving Lunatic
Joined: Wed. Apr 15, 2009
Posts: 8059 View posts
Location: San Jose, CA
Posted by alexru: Wed. Jun 10, 2015 - 06:23 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 1

I have no idea, I never tried standalone driver pack, it might be the same thing and there is something else is wrong and reinstalling the studio will not help.

 

You should be able to safely uninstall the studio afterwards and the board still should be recognized. There are no real drivers there, it is just an inf file for an HID device.

NOTE: I no longer actively read this forum. Please ask your question on www.eevblog.com/forum if you want my answer.

Top
c.dicaprio
c.dicaprio's picture
Level: New Member
Joined: Wed. Jun 10, 2015
Posts: 8 View posts
Posted by c.dicaprio: Thu. Jun 11, 2015 - 11:39 AM (Reply to #5)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hello Alexru,

no way to use it.

 

I reinstall the AVR Studio, restart the PC, but I have still the problem. The "EDBG CMSIS-DAP" device is not recognized.

I start a manual update of the driver, pointing windows to the "C:\Program Files (x86)\Atmel\Atmel USB Drivers\inf" folder, but with no result.

 

Actually, inside this folder, a folder like "EDBG CMSIS-DAP" is not present. May be the problem?

 

TIA

Clemente

Last Edited: Thu. Jun 11, 2015 - 11:38 AM
Top
Bronze Markawneil
awneil's picture
Level: 10k+ Postman
Joined: Fri. Jul 1, 2005
Posts: 25563 View posts
Location: Basingstoke, Hampshire, UK
Posted by awneil: Thu. Jun 11, 2015 - 11:55 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Sounds like time to contact Atmel Support ...

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillator: https://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
Top
c.dicaprio
c.dicaprio's picture
Level: New Member
Joined: Wed. Jun 10, 2015
Posts: 8 View posts
Posted by c.dicaprio: Thu. Jun 11, 2015 - 12:36 PM (Reply to #7)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Thanks awneil, I will try...

Top
marcossmartvorax
marcossmartvorax's picture
Level: Wannabe
Joined: Sun. Jun 7, 2015
Posts: 80 View posts
Posted by marcossmartvorax: Sat. Jun 20, 2015 - 11:34 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I have same problem , but I still didn't find solution.

Top
alexru
alexru's picture
Level: Raving Lunatic
Joined: Wed. Apr 15, 2009
Posts: 8059 View posts
Location: San Jose, CA
Posted by alexru: Sun. Jun 21, 2015 - 12:31 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 1

MOD: marcossmartvorax, please stop cross posting, or I will start deleting your posts. It does not increase your chances of getting a solution, it does quite the opposite.

NOTE: I no longer actively read this forum. Please ask your question on www.eevblog.com/forum if you want my answer.

Top
marcossmartvorax
marcossmartvorax's picture
Level: Wannabe
Joined: Sun. Jun 7, 2015
Posts: 80 View posts
Posted by marcossmartvorax: Sun. Jun 21, 2015 - 12:35 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Ok, I m sorry

Top
akinlabos
akinlabos's picture
Level: New Member
Joined: Thu. Nov 5, 2015
Posts: 1 View posts
Posted by akinlabos: Thu. Nov 5, 2015 - 01:33 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hi,

 

i have the same problem (Windows 7 Pro.). I've tried to reinstall Atmel Studio and to install the "Atmel USB drivers" package without success. Any ideas to solve this problem?

 

Best regards,

Akin

Top
lepton.phlb
lepton.phlb's picture
Level: New Member
Joined: Fri. Jun 27, 2014
Posts: 4 View posts
Posted by lepton.phlb: Fri. Feb 19, 2016 - 04:12 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hi,

I'm in the same situation. :-(. Windows 7 pro and  Atmel studio 7. 

 

Regards,

phlb.

Top
rhinerfeld
rhinerfeld's picture
Level: New Member
Joined: Fri. Jan 1, 2010
Posts: 7 View posts
Posted by rhinerfeld: Sun. Mar 19, 2017 - 08:45 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Not sure what happens in the latest version of Atmel Studio. I have version 6.2 and I could not get stuff.py script to run.

The problem was that the Avr-GCC 32 bit tool chain needed to be installed.

The installation path is the same that is us for the Avr-gcc 8 bit version.

 

Top
vineet_barc
vineet_barc's picture
Level: New Member
Joined: Wed. Jun 28, 2017
Posts: 3 View posts
Posted by vineet_barc: Wed. Jun 28, 2017 - 09:35 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hi,

Facing same problem. Trying to connect Atmel SAML21 Xplained pro board to my offline computer having windows 7 pro OS. I have installed latest version of Atmel Studio (as-installer-7.0.1417-full.exe) as well as installed USB driver (driver-atmel-bundle-7.0.712.exe) but still unable to connect as EDBG CMSIS-DAP driver is not found.

Top
marzaq
marzaq's picture
Level: New Member
Joined: Mon. May 20, 2019
Posts: 2 View posts
Posted by marzaq: Mon. May 20, 2019 - 03:42 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hello all,

 

I am also facing a similar problem.

 

Trying to connect Atmel SAM4E Xplained pro board to my computer with windows 7 Home Premium OS and Atmel Studio 7.

 

The error message after I connect the board to my computer USB  and install the driver is "Device driver software was not successfully installed".

 

Any help? Anyone above was able to solve this problem?

 

Thank you in advance for any help!

 

Top
marzaq
marzaq's picture
Level: New Member
Joined: Mon. May 20, 2019
Posts: 2 View posts
Posted by marzaq: Mon. Jun 3, 2019 - 03:00 PM (Reply to #16)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hello, 

 

I was able to solve my problem.

 

It was related to a Windows Update failed on my computer (it was not checking for updates).

 

I was able to fix it and EDBG USB driver was properly installed in my computer.

 

The curiosy thing is that Atmel Studio installer checked for the Windows Update packages on my computer and didn`t report any problem.

 

So my advice for who faces the same problem is: Check if Windows Update is really working on you computer (pls see https://www.wintips.org/windows-...) or reinstall Windows.

 

Top