Issue with SAM-BA 2.16 while connecting

Log in or register to post comments
Go To Last Post
2 posts / 0 new
Author
Message
sumantgupta
sumantgupta's picture
Level: New Member
Joined: Fri. Jul 29, 2016
Posts: 1 View posts
#1
Posted by sumantgupta: Fri. Jul 29, 2016 - 07:11 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hi ,

I am using Sam Ba 2.16 and facing the issue while connecting.

 

Select the Connection: COM port is chosen automatically through the USB connected .

Select the board: I use the required board. But upon clicking "Connect" it does not show anything and it disappears. But the task manager is showing the sam-ba.exe process running.

Please help ,how to debug it any logs etc..

 

Regards

Sumant

 

Tags:

Tools, In-System Debuggers and Programmers (ARM-related)
Top
adm
adm's picture
Level: New Member
Joined: Fri. Feb 8, 2019
Posts: 1 View posts
Posted by adm: Fri. Feb 8, 2019 - 08:09 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I encountered the same issue with SAM-BA v2.18. My colleague is trying to connect via USB to at91sam7s256-ek, but never succeeded. I cannot narrow down the problem, for some other colleagues are able to connect. Main Window doesn't show up. Then I have to kill the sam-ba process in Task Manager. There one thing worth of mentioning - my colleagues deal with two different boards with Atmel AT91SAM7S256. And only one board have the issue on some computers.

I installed sam-ba on a laptop with Win 8.1 x64 to test and got it working. I suspect this issue is related to software/os configuration. Is there a way to debug the process of connecting to boards?

 

UPD: I attached two log files. log-fail.txt from the PC where sam-ba isn't working and log-success.txt from a laptop where all connection attempts were successful.

Attachment(s): 

Plain text icon log-fail.txt
Plain text icon log-success.txt

System Administrator

Last Edited: Fri. Feb 8, 2019 - 08:10 AM
Top