SAMD21 Error Updating Firmware on Atmel Studio 7 (7.0.1931)

Go To Last Post
3 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hi guys,

 

So now I have the SAMD21 and the Winc1500 module. 

 

I opened the Atmel Studio and created the WINC1500 Firmware Update example projetct. 

 

I went to the folder location and opened the samd21_xplained_pro_firmware_update.bat. 

 

I ran it but i got this failure:

 

 

Can you please tell me how to fix it?

Thank you.

 

Best regards.

 

 

 

Last Edited: Tue. Aug 14, 2018 - 12:16 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Should be moved to the 802.11/Wi-Fi   forum

 

https://community.atmel.com/forums/80211wi-fi

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

in the log the chip id is 1502b1, which is for winc1500pa module. when i saw the latest that we get from microchip are only winc1500pb which has chip id of 1503a0, may that is the reason the firmware is failing. check the module part number if it is ATWINC1500-MR210PB