SAMG55 Xplained Pro-WINC1500 Mismatch Firmawre Version

Log in or register to post comments
Go To Last Post
5 posts / 0 new
Author
Message
thienhoang156
thienhoang156's picture
Level: New Member
Joined: Mon. Jul 16, 2018
Posts: 5 View posts
#1
Posted by thienhoang156: Mon. Jul 16, 2018 - 09:13 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hi all,

 

I am a new guy for programming on Atmel ARM-cortex chip.

I am working on SAMG55 Xplained Pro connect with WINC1500 and want to run a wifi demo.

However, when I run any examples for wifi by WINC1500. It will have problem like picture below:

 

Please help me to solve this problem!!!

 

Phạm Hoàng Thế-PeterPham-范宏泰
Occupation: Master student.
Major: Electrical Engineering
National Formosa University
Phone: (+886)966401134 - Mail : phamhoangthe@gmail.com

Tags:

Wireless, 802.11/Wi-Fi
Top
Bronze Markawneil
awneil's picture
Level: 10k+ Postman
Joined: Fri. Jul 1, 2005
Posts: 25563 View posts
Location: Basingstoke, Hampshire, UK
Posted by awneil: Mon. Jul 16, 2018 - 02:42 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

thienhoang156 wrote:
I am a new guy for programming on Atmel ARM-cortex chip.

Are you familiar with other Cortex chips?

Or other non-Cortex chips?

Or programming in general?

 

 

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillator: https://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
Top
thienhoang156
thienhoang156's picture
Level: New Member
Joined: Mon. Jul 16, 2018
Posts: 5 View posts
Posted by thienhoang156: Sun. Jul 22, 2018 - 06:29 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Yes. I already had experiences with STM32 series chip!

Phạm Hoàng Thế-PeterPham-范宏泰
Occupation: Master student.
Major: Electrical Engineering
National Formosa University
Phone: (+886)966401134 - Mail : phamhoangthe@gmail.com

Top
dragonhead
dragonhead's picture
Level: New Member
Joined: Thu. Mar 10, 2016
Posts: 12 View posts
Posted by dragonhead: Wed. Jul 25, 2018 - 06:56 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I think the latest example projects are for WINC1500 firmware version 19.5.4 (and you have 19.5.2 on-board the WINC).

Update WINC1500 firmware:

https://www.avrfreaks.net/sites/...

 

and then Run the samg55_xplained_pro_firmware_update.bat batch file

 

Hopefully, this will sort it out.

Top
thienhoang156
thienhoang156's picture
Level: New Member
Joined: Mon. Jul 16, 2018
Posts: 5 View posts
Posted by thienhoang156: Wed. Aug 1, 2018 - 01:51 AM (Reply to #4)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

That is a good solution!!yes

 

I already solved it smiley

 

Thanks for your support!

Phạm Hoàng Thế-PeterPham-范宏泰
Occupation: Master student.
Major: Electrical Engineering
National Formosa University
Phone: (+886)966401134 - Mail : phamhoangthe@gmail.com

Top