How to upgrade or download a firmware to Atmel SAMDA1 Xplained Pro.

Go To Last Post
3 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

hi,

I have a samda1xplainedpro board. My board stuck in bootloader (idle) mode and my board is not recognize on atmel studio. Status and power led flash continuusly on board. And EDBG (embeded debugger ) not visible on atmel studio in avaliable tools menu . Can you help me for this problem?.

This topic has a solution.
Last Edited: Thu. Mar 29, 2018 - 06:04 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hi,

 

Are you sure that you are still connected to the debug USB? (just asking)

Now, in device manager, see if the board has been detected.

Since it has got an embedded debugger on board, its highly unlikely no to detect the board.

Also try the device programming option under tools in atmelstudio and try reading supply voltage & device signature and see if you could get a hit on that.

 

Cheers,

Hari

Silly beans are always silly
:)

This reply has been marked as the solution. 
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Thnks for interest in my problem but I solved it using manuel fw uptade using terminal  thnks .